Replacing Bottles in GE Magneblast Switchgear

The General Electric Magneblast is one of those iconic circuit breakers that if you spend any time in or around switchgear, you will have reason to deal with them. Manufactured from the 1950's through the early 1970's, they are usually found in large manufacturing facilities, from automotive plants to steel mills to repurposed properties that once had high volume production runs of one kind or another. It is sometimes called a "vertical lift" breaker. It is characterized by a unit that rolls into an enclosure and then lifted vertically into place and then connected to the line and load side by means of a vertical lift mechanism.

With ratings from 2.4kV through 15kV, frame sizes of 600, 1200, 2000 and even 3000 amp and interrupting ratings from 50MVA to 1000MVA, these breakers cover almost every conceivable industrial, commercial and utility application. Documentation for most of these frames can be found on our website www.npeinc.com/resources  or by contacting NPE personnel with specific requests at info@npeinc.com, 800-647-0815 or by fax 216-898-2684, yes, we still have one!

We have found over time, the original "tar pitch" that was used to insulate the primary conductor in the center of the primary disconnect bottle has outlived its useful lifespan. It can crack and absorb moisture and loosen the connection inside and eventually lead to catastrophic failure. That's where NPE and our experience can help to increase the safe, useful lifespan of your switchgear with our repotting program.

Regardless of what your GE Magneblast breaker and switchgear needs are, you will find that NPE has "The right part, at the right price, right now!"

National Power Equipment, Inc. is your one stop shop for air and vacuum circuit breakers, switchgear, primary switches, motor starters and of course, parts!